Chris De Herrera's Windows CE Website

About
Discuss.Pocket PC FAQ Forum

Add Pocket PC FAQ to your Favorites
RSS    RSS Feeds
Wiki    Lost?
Custom Search
Subscribe    Print
Miscellaneous
Table of Contents
Mobile Format
News

[an error occurred while processing this directive]


 
Pocket PC Magazine Best Site

Website Awards
Website Updates

By Chris De Herrera 
Copyright 1998-2007
 All Rights Reserved
A member of the Talksites Family of Websites

Windows and Windows CE are trademarks of Microsoft
Corporation
and are used
under license from owner.
CEWindows.NET is not
associated with Microsoft 
Corporation.

All Trademarks are owned
by their respective companies.

Casio Cassiopeia E-15 Power FAQ
By Casio

[an error occurred while processing this directive]

As a service to the Windows CE community, Pocket PC FAQ is offering these files provided by Casio. No affiliation exists between Pocket PC FAQ and Casio USA, Inc.

P. 1. CPU locks up randomly. 2. No touch panel entry. 3. Random communication Error messages.

S. The ACL (Automatic Power On Clear) cycle may not have been done effectively before using the unit for the first time. A) Remove both the main batteries and the backup battery (this will erase anything that was entered in the unit). B) Wait five minutes. C) Load the main batteries. D) Wait five seconds. E) Load the backup battery. Customers may be making the mistake of removing the backup battery's protection insulator prior to pressing Reset button.


Q. I just installed batteries into my unit and it will not power on.

A. Make sure the switch near the battery compartment is in the LOCK position.


Q. How can I make my batteries last longer?

A. To conserve batteries, turn off your sound, avoid letting the LED flash for long periods of time, and plug the device into AC power as much as possible.


Q. When I place the E-15 in the cradle with the rechargeable battery pack installed, the light glows green momentarily and then changes to red. Why is this?

A. This is normal. The red light indicates that the battery pack is charging. It will change to green when charging is complete.


Q. Can I recharge the battery pack by connecting the AC adapter directly to the E-15 without using the cradle?

A. No. The battery pack can only be charged by connecting the E-15 to the cradle while the AC adapter is also connected to the cradle.


Q. I have installed the rechargeable battery pack correctly, but the charging light on the cradle won't turn on.

A. Back up any important data from the E-15 to your desktop PC. Disconnect the cradle from the PC. Remove the E-15 from the cradle, and remove all of the batteries. Connect the AC adapter to the cradle. Ensure that the black wrapping on the battery pack is still intact and insert it. With the backup battery out of the unit, replace the battery cover. Place the E-15 in the cradle, and the charging light should turn on. Allow it to charge for 90 minutes. When done, take the E-15 out of the cradle, replace the backup battery, and turn on the E-15.


Q. Can I use the A-20's AC adapter?

A. The E-15 comes with the AC adapter. However, you can also use the A-20's AC adapter.

[an error occurred while processing this directive]

Return to Chris De Herrera's Windows CE Website