 |
Chris De Herrera's Windows CE Website |
|---|---|
About |
|
| By Chris De Herrera Copyright 1998-2007 All Rights Reserved A member of the Talksites Family of Websites Windows and
Windows CE are trademarks of
Microsoft All Trademarks are owned |
Casio Cassiopeia E-15 Hardware FAQ
By Casio
[an error occurred while processing this directive]
As a service to the Windows CE community, Pocket PC FAQ is offering
these files provided by Casio. No affiliation exists between Pocket PC FAQ
and Casio USA, Inc.
Q. How do I activate the Action button when performing the initial
setup? I tried to press Action on the screen but nothing happens.
A. The Action button is located on the left side of the E-15.
A. Hold the Power button and press the Reset button for at least two
seconds.
A. Hold the Power button and press the Action button inward.
A. Hold the Exit button and rotate the Action button upward for a
darker display, or downward for a lighter display.
A. Go to Start, then Settings, then Display, and then click the
Backlight tab.
A. This is a strong indication that the unit's batteries are at a low
level condition. This is a function of the unit.
A. No, this is normal. The internal EL backlight will make a slight
noise when it is on.
A. Microsoft Windows CE for the palm-size PC does not currently support
printing directly to a printer through either the serial interface or the
IR port. However, there are third-party programs which have the ability to
print documents.
A. Yes, you can. However some of the files (HTML) that you can see on
the H/PC cannot be viewed from the E-15.
A. Press the Reset button.
S. Some ThinkPads have OS/2 installed as the primary boot partition and
Windows 95 in a second partition. This may cause CE installation problems.
If the PC is reconfigured to Windows 95 only then Windows CE should work
fine.
A. If you forget your password, the only way to use your Cassiopeia
again is to perform a full reset according to the manufacturer's
instructions. Caution: this will delete all your data.
A. Tap Start, then Settings, then System, then the General tab. This
will show how much memory is installed in the system (not including
expansion card memory). It will also specify the processor type, the
Windows CE version and the type of expansion card (if one is installed).
Q. What is the button combination for a full reset?
Q. What is the button combination to recalibrate the stylus?
Q. What is the button combination to adjust contrast?
Q. How do I change the amount of time that the backlight stays on before
turning off automatically?
Q. My unit's backlight will not light or will only light for a few
seconds.
Q. I can hear a noise when the backlight is turned on. Is my E-15 broken?
Q. Does the E-15 support direct printing via the infrared or serial port?
Q. Can I transfer files between the E-15 and an H/PC through the infrared
port?
Q. File size of the CF memory card changed.
P. Incompatibility with IBM ThinkPad series laptops.
Q. I forgot my password! What can I do?
Q. How do I find out information about my Cassiopeia such as total memory,
processor type or OS version?
[an error occurred while processing this directive]