Date
Added |
Device |
Problem
Description |
Resolution |
Compaq |
4/17/03 |
iPAQ 5400 |
iPAQ does
not power on even though the unit runs fine when plugged
into the AC Adapter. Also battery shows it is charged. |
See this
customer advisory and download this driver -
SP24131 |
4/17/03 |
iPAQ 5400 |
Headset
volume is much lower than other iPAQs. |
Install the
Headset Volume Improvment |
8/15/02 |
iPAQ 3900 |
Users
have reported problems using Infrared to communicate to
printers and other peripherals. Apparently additional
IR pulses are being sent that are not recognized by the
other device. |
Install
the
iPAQ 3900 Infrared Fix |
4/18/02 |
iPAQ 3870
or 3875 |
When
using the built-in Bluetooth adapter, communications are
limited to 115.2k instead of the 768k that is the true
limitation of Bluetooth's data channel. |
This is a
design limitation by Compaq. All Bluetooth requests
are routed through the serial port UART which is limited to
115.2k baud. You may notice this limitation if you try
to access Bluetooth access points for the web or have high
speed data like 1xRTT or GPRS. |
4/17/02 |
iPAQ 3800 |
When
using the iPAQ 3800 outside users have noticed that the
systems are very slow. |
By
design, the Infrared ports in Pocket PC 2002 are enabled all
the time. The Infrared port in the iPAQ 3800 is
sensitive to sunlight and causes the system to think it is
beginning an Infrared connection. Disable the Infrared
port using Start - Settings - Beam. |
4/17/02 |
iPAQ 3800 |
After
using the iPAQ 3800 for a few hours the backlight does not
stay on. Also, this can occur when powering on the
iPAQ. |
There is
a known issue with the iPAQ 3800 series backlight which
causes it to not come on, Please contact Compaq for a
repair. See
Compaq Customer Advisory. |
4/3/02 |
iPAQ 3870
or 3875 |
When
attempting to use Bluetooth, the user is notified that the
Bluetooth stack can not be loaded. |
Install
the
iPAQ Bluetooth Manager 1.1 or soft reset your iPAQ
to use Bluetooth. |
11/26/01 |
iPAQ 3800 |
The
Notification light that blinks when any type of alarm goes
off. However no matter what the setting is in Start -
settings - Sounds& Notification , it will ONLY blink for 5
minutes. |
Open
Issue |
11/26/01 |
iPAQ 3800 |
Static
when docking and undocking and when Alarm 1 goes off. All
sounds play fine if they are played through Start - settings
-Sounds& Notificaion , so it's not a bad wave file. |
Open
Issue to be addressed with a rom update |
11/14/01 |
iPAQ 3800 |
When the
user sets the brightness to the lowest setting, the
backlight flickers |
Open
Issue |
10/31/01 |
iPAQ 3800 |
Go to
Calculator. Click on the Currency Button at the bottom (next
to the numbers 123) Click on the Currency type to calculate
from at the top of the screen. A drop down box will appear
with scroll bars right and left. Using the bottom scroll
bar, scroll to the right all the way, then scroll back. The
first letter of the Country gets chopped off and is not
refreshed properly. Submitted by Greg Heidt |
Open
Issue. This only affects the display. The calculator still
works fine. |
10/18/01 |
iPAQ 3700 |
User
hears loud popping from the unit when they use the iPAQ
after the mute option has been selected. |
Open
Issue |
|
iPAQ
3700, 3600 |
iPAQ 3600
with upgrades and 3700 owners should check the
Pocket PC Bugs - Compaq
for additional issues. |
|